Filter Your Results
AFFINILUTE™ MIP Columns
Molecularly Imprinted Polymers
Biotage AFFINILUTE™ MIP products were withdrawn on June 6th 2019 Please contact us here to discuss alternative products
Atlantic® ReadyDisk
Single-use Solid Phase Extraction (SPE) Disks for Water Extraction
Atlantic® ReadyDisks are solid phase extraction (SPE) disks, pre-assembled into disposable holders and are used for extracting organic and semivolatile organic compounds from aqueous matrices. The ReadyDisks are designed for single-use extractions with maximum speed and convenience in mind.
Biotage® Extrahera™
SLE, SPE, PLD and PPT Automation
Extrahera™ is a powerful, user friendly automation system for Supported Liquid Extraction (SLE), Solid Phase Extraction (SPE), Phospholipid Depletion (PLD) and Protein Precipitation (PPT) based methods, in plate or column formats.
Biotage® Horizon 4790
Previously known as SPE-DEX® 4790
The Biotage® Horizon 4790 automated extraction system is a programmable, multipurpose SPE disk system, capable of processing aqueous samples directly from their original containers.
Biotage® Horizon 5000
Previously known as SPE-DEX® 5000
Biotage® Horizon 5000 is a three-position automated disk extraction system that conditions the disk, loads the sample (20 mL to 2 L) and elutes the analytes all without user intervention.
Biotage® Horizon SmartPrep
Automated Cartridge Extraction
The Biotage® Horizon SmartPrep is designed for simple automation of manual solid phase extraction (SPE) methods. Up to 12 samples per SmartPrep System can be run. To control the SmartPrep System, choose the front touch screen or the intuitive SmartPrep software. Run the same method or different methods for each of the 12 samples.
Biotage® Horizon SPE-Z
Disk Extraction Manifold
The Biotage® Horizon SPE-Z was withdrawn on June 28th 2019 This product was replaced with the Biotage® VacMaster™ Disk
Biotage® Lysera
Lyse or homogenize the toughest samples in seconds
Biotage® Lysera is the most advanced and easy to use bead mill homogenizer available. It is specifically designed for grinding, lysing, and homogenizing biological samples prior to sample preparation.
Biotage® PRESSURE+
Positive Pressure Manifolds for simple Sample Preparation
Biotage® PRESSURE+ manifolds deliver positive pressure, parallel processing for 96 well plates, 1 mL 3 mL and 6 mL column formats. The systems utilize a consistent, uniform flow of positive pressure to move both low and high viscosity liquids through SPE plates and columns.
Biotage® Solvent Recovery SVOC
Previously known as Solvent TrapSVOC
The Biotage® Solvent Recovery SVOC is designed to condense and collect solvent vapors which are generated when using the DryVap® concentration system.
Biotage® VacMaster™ 10 and 20
Sample Processing Manifolds
Biotage® VacMaster™ Sample Processing Manifolds allow up to 10 (VacMaster-10) or 20 (VacMaster-20) SPE or filtration columns to be processed simultaneously under vacuum. Unused ports are sealed when not required. Easy to use vacuum controls provide excellent sample flow control, leading to reproducible, reliable extraction conditions.
DryVap®
Automated In-line Drying and Concentration System
The DryVap® Concentrator System automates the drying, evaporation, and concentration of organic solvent extracts prior to chromatographic analysis, combining what were once manual steps into one automated process.
ISOLUTE® Multimode
SPE Columns
ISOLUTE® Multimode is a mixed-mode sorbent frequently used in 'scavenging' mode for isolation of compounds from complex mixtures.
ISOLUTE® Myco
Solid Phase Extraction Columns for Mycotoxin Analysis
One product with multiple applications, simplifying and streamlining your mycotoxin analysis procedures.
ISOLUTE® QuEChERS
Fast and Efficient Clean up of Complex Food Samples
ISOLUTE® QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) products provide simple clean-up of complex samples using salt assisted extraction and partitioning, followed by dispersive SPE.
ISOLUTE® SAX/PSA
SPE Columns
Fast, simple sample clean-up. Remove polar interferences and pigments from plant extracts prior to pesticide residue analysis using these mixed bed SPE columns. Polar interferences are retained on the column while non-polar pesticides and other analytes pass straight through for analysis.
ISOLUTE® Sodium Sulfate Drying Cartridge
In-line drying of SPE elution solvents
Dry organic solvents with this easy to use format. Stack under SPE columns during elution for efficient, in-line solvent drying.
RapidTrace®+
Rapid Automated Sample Preparation for Routine Processing and Method Development
The RapidTrace®+ was withdrawn on July 22nd 2019 Please contact us here to discuss alternative products or why not check out Biotage® Extrahera™
TurboVap® EH
Automated Solvent Evaporation System
TurboVap® EH solvent evaporator is a brand new addition to the TurboVap family designed to streamline a customer’s workflow following sample processing on Extrahera. The system builds on the solid foundations of the existing TurboVap product line and incorporates many new features.
TurboVap® II
Automated Solvent Evaporation System
The new TurboVap® II is built on the solid foundations of reliability and peformance that made it the market leader for solvent evaporation. The unit provides parallel evaporation of up to 6 samples in either 50 mL or 200 mL glassware with or without end point detection. The modern design incorporates many new customer driven features for easier use and expanded functionality. TurboVap II still utilizes the highly efficient patented gas vortex shearing technology, which is synonymous with the TurboVap brand.