Blog

Water and Environmental Testing

Solid phase extraction is a great technique for separating many of these contaminants from water samples.

Water and Environmental Testing

Tired of shaking liquid-liquid extractions (LLE), want to move to a technique that is less labor-intensive, solid phase extraction may be ...

Water and Environmental Testing

Have you extracted samples for oil and grease compounds using so SPE and thought, why do I have to use all these solvents, read our blog ...

Water and Environmental Testing

If you’re processing samples for oil and grease, see what your options are for extraction. Can you use cyclohexane as a safer alternative ...

Water and Environmental Testing

If your EPA Method permits you to choose your drying technique, then think about your options, just make sure all your QC requirements are ...

Water and Environmental Testing

EPA Method 1664B seems pretty straightforward, use n-hexane to extract compounds (commonly referred to as “oil and grease”) from an ...

Water and Environmental Testing

The key to working safely with methylene chloride – or any solvent, for that matter – is knowing how to be safe around it.

Clinical, Forensic and Doping Testing

Preventative maintenance is one of the most important tasks to be done in a laboratory, particularly when a lab is full of instruments.

Water and Environmental Testing

1,4 dioxane – sometimes referred to as just dioxane was added to the UCMR 3 list and is now a regulated, routinely monitored contaminant.

Water and Environmental Testing

Is your water safe to drink? To properly monitor and document the health risk, water samples must be collected, extracted, separated and ...