Blog

Water and Environmental Testing

If your EPA Method permits you to choose your drying technique, then think about your options, just make sure all your QC requirements are ...

Clinical, Forensic and Doping Testing

Preventative maintenance is one of the most important tasks to be done in a laboratory, particularly when a lab is full of instruments.

Water and Environmental Testing

In honor of World Water Day, I challenge you to use significantly less water on March 22, than you use on a regular basis.

Water and Environmental Testing

Lab solvents and SPE consumables used in the lab should be quality controlled and monitored for contaminants routinely.

Water and Environmental Testing

Acetone could be the problem! Check out our blog post for tech tips on what to look for when evaporating samples.

Water and Environmental Testing

Each EPA method dictates which analysis instrument must be used within each method, however, we will determine why that option was chosen.

Water and Environmental Testing

In this blog post we discuss simplifying water extractions with SPE – One Matrix, One Method Extraction

Water and Environmental Testing

In this blog post we cover common mistakes when it comes to contaminated squeeze bottles.

Water and Environmental Testing

This blog will be going through the differences between a performance-based EPA method and a prescriptive-based EPA method.

Water and Environmental Testing

Why are flow rates are so important when performing sample preparation with solid phase extraction (SPE).