Blog

Flash chromatography is a purification technique used by chemists to isolate their targeted compound from by-products and impurities. Because the reaction mixture (or natural product extract) may have...

Automated flash chromatography systems have helped synthetic chemists speed up their synthetic research. One major advancement with these systems over the past 15 or so years has been the addition of ...

The evolution of flash column chromatography has brought chemists many new and exciting options for crude mixture purification. Among them are so-called high-performance flash columns or cartridges. T...

Over the course of my career, I have had terrific interactions with a multitude of chemists discussing chromatography. When it comes to flash chromatography the approaches from these chemists ranged f...

With most chromatographic purifications, only two solvents are needed to adequately separate compounds from each other. Unfortunately, there are instances where the separation is either poor or cannot...

This is an interesting question that I am asked from time to time. There does seem to be two camps in which chemists reside – one believing longer and thinner columns provide better separations and th...

The bane of organic synthesis for most chemists is purification rather than synthesis. Synthetic reaction mixtures are rarely devoid of impurities so some type of purification is necessary. Most often...

Media particle size and solvent flow rate play major roles in chromatographic separations including flash purification. This is true in both reversed-phase chromatography (aka partition chromatography...

Many chemists I talk to understand that TLC data is useful for flash chromatography method development. Most also know that they should try to get their target compound to elute with an Rf between 0.1...

Silica is the most commonly used sorbent for flash column chromatography. When solvent is pumped through a column packed with dry silica you may notice it gets warm and sometimes down right hot!