|Chemical description||Octyl (C8, non-endcapped) and quaternary amine (-NR3+)|
|Sorbent type||Mixed-mode (non-polar and strong anion exchange)|
|Average particle size||50 µm|
|Pore diameter||60 Å|
This method was developed for the extraction of the tetrahydrocannabinol carboxylic acid metabolite (THC-COOH) from urine using a mixed non-polar and anion exchange retention mechanism. Typical recoveries of the analyte are > 75%.
THC, THC-COOH, BIOTAGE, ISOLUTE, SPE, DOA, drugs of abuse
Tags: Application Notes, Column, Forensic, GC-MS, THC-COOH, Urine
Tags: Application Notes
In this catalog product information is displayed with easy-to-follow application details and supporting documentation.
Ordering information is found following each product listing.
The first decision that needs to be made is what the final analysis will be for the analyte. This will have an impact on the sample and cartridge size, as well as the final elution solvent. Gas chromatography offers higher sensitivity than HPLC, while HPLC is better suited for ionisable species and very high molecular weights. If LC-MS is available, minimal sample clean-up may be required.
Tags: Manuals & User Guides
This poster uses gel electrophoresis data to visually illustrate the amount of residual protein in extracts prepared using protein precipitation, supported liquid extraction and various silica and polymer based SPE approaches.
Tags: Biological fluids, English, HPLC, LC-MS/MS, Plasma, Posters
Sample preparation techniques such as protein precipitation, supported liquid extraction or non-polar SPE may not be selective enough to give extracts of sufficient purity for low level analysis. In these cases, the selective mixed-mode approach to the extraction of basic and acidic drugs is a suitable alternative, giving very high purity extracts with minimal levels of co-extracted material.
Tags: Product Notes
ISOLUTE HAX mixed-mode SPE sorbent is based on a combination of strong anion exchange and non-polar chemistries. Acidic drugs are retained by two primary retention mechanisms. This allows a rigorous interference elution regime to be used to elute interferences retained by either non-polar or anion exchange interactions alone. Only analytes with both non-polar and acidic characteristics are extracted usign the ISOLUTE HAX sorbent, providing an extremely pure final extract.
Tags: Product Notes
This application note describes the operating conditions for the automated fractionation of EPH into aliphatic and PAH fractions using the ISOLUTE® EPH column in conjunction with the Biotage&re...20 February 2017
This application note describes the extraction of 49 drugs of abuse from whole blood, prior to UPLC-MS/MS analysis. An effective and efficient ISOLUTE SLE+ protocol optimized the for ...05 January 2016
Now available, the Biotage 2016 catalog of analytical sample preparation products for chemistry professionals. This edition includes a comprehensive range of products for bioanalysis, forensic, cli...11 August 2015
Dilute and shoot (D&S) methods are promoted for use by analytical instrument vendors in clinical, forensic toxicology and bioanalytical laboratories. More sensitive LC-MS/MS systems make this s...27 March 2015
Biotage, pioneers in flash chromatography, started packing columns with silica for flash purification 30 years ago. Some of the first employees are still with us today. In this video, site director...08 January 2015
Now available, the Biotage 2015 catalog of analytical sample preparation products for chemistry professionals. This edition includes a comprehensive range of products for bioanalysis, forensic, cli...29 July 2014
Buy your Biotage consumables through our website and shipping is free For a limited time, free shipping is applied to Biotage consumables orders through the Biotage website*. Let Biotage make orde...
What is the maximum capacity of an SPE column?
The capacity of a sorbent is defined as the total mass of strongly retained analyte that can be retained by a given mass of the sorbent under optimum conditions.
For most sorbents, this can range from 1-5% by weight. 100 mg of sorbent might retain 1-5 mg of analyte.
Ion exchange sorbents typically have a capacity of 0.3-1 meq/g.Browse more questions and answers >
|Part No.||Description||Product type||Pack Size||Price|
|903-0010-A||ISOLUTE® HAX 100 mg/1 mL||Consumables||100||Log in for price|
|903-0020-B||ISOLUTE® HAX 200 mg/3 mL||Consumables||50||Log in for price|
|903-0020-C||ISOLUTE® HAX 200 mg/6 mL||Consumables||30||Log in for price|
|903-0020-H||ISOLUTE® HAX 200 mg/10 mL (3 mL XL)||Consumables||50||Log in for price|
|903-0025-P01||ISOLUTE®-96 HAX 25 mg plate||Consumables||1||Log in for price|